Free floating ornament SVG

Baby feet floating ornament SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Baby feet floating ornament, in layered colours
Baby feet floating ornament. The preview is the SVG file itself.

Two small footprints side by side, each with five toes, and a heart above them. For a first Christmas: add the baby’s name and the year under the feet.

What is in the file

Size92 × 100 mm (3.62 × 3.94 in), scales to any size
Pieces12 separate pieces
Outlines to cut13: 12 outer edges and 1 cut-out
Cut length1,010 mm at this size
Narrowest part2.1 mm at this size
Nodes121 curve and line segments
Layers2: decal and insert

Measured from the file. PNG: 1,844 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.92 × 1 in (23 × 25 mm)0.53 mm257 mm100Fine detail: vinyl and paper only, weed with care
1.84 × 2 in (47 × 51 mm)1.1 mm513 mm25Vinyl, card and thin sheet
2.76 × 3 in (70 × 76 mm)1.6 mm770 mm12Vinyl, card and thin sheet
3.68 × 4 in (93 × 102 mm)2.1 mm1,026 mm6Vinyl, card and thin sheet
5.51 × 6 in (140 × 152 mm)3.2 mm1,539 mm2Any material, including 3 mm wood and acrylic
7.35 × 8 in (187 × 203 mm)4.3 mm2,052 mm1Any material, including 3 mm wood and acrylic
11.03 × 12 in (280 × 305 mm)6.4 mm3,078 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More floating ornament SVG files

← Snowman floating ornament All 14 floating ornaments Paw print floating ornament with a halo →