Free fall wreath SVG

Heart-shaped fall wreath SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Heart-shaped fall wreath, as a solid black shape
Heart-shaped fall wreath. The preview is the SVG file itself.

Oak leaves, pointed leaves and berries set along the outline of a heart, each side a mirror of the other. For an autumn wedding sign or a thankful card.

What is in the file

Size100 × 79 mm (3.94 × 3.1 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length1,133 mm at this size
Narrowest part1.8 mm at this size
Nodes599 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,590 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.79 in (25 × 20 mm)0.46 mm288 mm120Too fine for most machines
2 × 1.57 in (51 × 40 mm)0.91 mm576 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.36 in (76 × 60 mm)1.4 mm863 mm12Vinyl, card and thin sheet
4 × 3.15 in (102 × 80 mm)1.8 mm1,151 mm6Vinyl, card and thin sheet
6 × 4.72 in (152 × 120 mm)2.7 mm1,727 mm2Vinyl, card and thin sheet
8 × 6.3 in (203 × 160 mm)3.7 mm2,302 mm1Any material, including 3 mm wood and acrylic
12 × 9.44 in (305 × 240 mm)5.5 mm3,453 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fall wreath SVG files

← Full fall wreath of pointed leaves All 15 fall wreaths Fall wreath of oak leaves with a bow →