Free fall wreath SVG

Fall wreath outline of maple leaves SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fall wreath outline of maple leaves, drawn as a line
Fall wreath outline of maple leaves. The preview is the SVG file itself.

The maple leaf wreath as a line about 2 mm wide round the whole shape, inside and out. For colouring pages, foil, pen plotting or engraving.

What is in the file

Size99 × 100 mm (3.88 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut29: 1 outer edge and 28 cut-outs
Cut length1,677 mm at this size
Narrowest part1.8 mm at this size
Nodes724 curve and line segments
Symmetry9-fold rotation

Measured from the file. PNG: 1,971 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.99 × 1 in (25 × 25 mm)0.46 mm426 mm100Too fine for most machines
1.97 × 2 in (50 × 51 mm)0.91 mm852 mm25Fine detail: vinyl and paper only, weed with care
2.95 × 3 in (75 × 76 mm)1.4 mm1,278 mm9Vinyl, card and thin sheet
3.94 × 4 in (100 × 102 mm)1.8 mm1,704 mm4Vinyl, card and thin sheet
5.91 × 6 in (150 × 152 mm)2.7 mm2,556 mm1Vinyl, card and thin sheet
7.88 × 8 in (200 × 203 mm)3.7 mm3,408 mm1Any material, including 3 mm wood and acrylic
11.82 × 12 in (300 × 305 mm)5.5 mm5,111 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fall wreath SVG files

← Crescent fall wreath, open at the top All 15 fall wreaths Fall wreath in four colours →