Free explosion box SVG

Rectangle explosion box with a lid SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Rectangle explosion box with a lid, as a solid black shape
Rectangle explosion box with a lid. The preview is the SVG file itself.

An oblong box for a photo or a bar of chocolate: two long walls, two short ones and a lid to match. Cut 245 mm wide, the base is 70 by 45 mm and the walls 45 mm tall. Loose pieces.

What is in the file

Size100 × 55 mm (3.94 × 2.18 in), scales to any size
Pieces2 separate pieces
Outlines to cut42: 2 outer edges and 40 cut-outs
Cut length661 mm at this size
Narrowest part0.8 mm at this size
Nodes200 curve and line segments

Measured from the file. PNG: 2,000 × 1,140 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.55 in (25 × 14 mm)0.2 mm168 mm160Too fine for most machines
2 × 1.11 in (51 × 28 mm)0.41 mm336 mm45Too fine for most machines
3 × 1.66 in (76 × 42 mm)0.61 mm504 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.21 in (102 × 56 mm)0.81 mm672 mm10Fine detail: vinyl and paper only, weed with care
6 × 3.32 in (152 × 84 mm)1.2 mm1,007 mm3Vinyl, card and thin sheet
8 × 4.42 in (203 × 112 mm)1.6 mm1,343 mm2Vinyl, card and thin sheet
12 × 6.64 in (305 × 169 mm)2.4 mm2,015 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More explosion box SVG files

← Octagon explosion box with a lid All 11 explosion boxes Heart explosion box with a lid →