Skid steer, the excavator’s small helper SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A skid steer beside the excavator fleet: a short, tall body on four equal wheels, a caged cab, lift arms that pivot at the back and reach over to a bucket resting on the ground in front.
What is in the file
| Size | 100 × 84 mm (3.94 × 3.29 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 19: 1 outer edge and 18 cut-outs |
| Cut length | 932 mm at this size |
| Narrowest part | 3.7 mm at this size |
| Nodes | 124 curve and line segments |
Measured from the file. PNG: 2,000 × 1,685 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.84 in (25 × 21 mm) | 0.94 mm | 237 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.67 in (51 × 42 mm) | 1.9 mm | 473 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.51 in (76 × 64 mm) | 2.8 mm | 710 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.34 in (102 × 85 mm) | 3.8 mm | 947 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 5.02 in (152 × 127 mm) | 5.6 mm | 1,420 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.69 in (203 × 170 mm) | 7.5 mm | 1,894 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.03 in (305 × 255 mm) | 11 mm | 2,841 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More excavator SVG files
-
Front loader to work beside an excavator Solid · one piece -
Dumptruck for an excavator to fill Solid · one piece -
Excavator loading a dump truck Solid · one piece -
Heavy equipment operator in an excavator cab Solid · one piece -
Excavator logo in a cog Solid · one piece -
Excavator outline Outline · one piece -
Layered excavator in four colours Layered · 13 pieces -
Excavator digger from the side Solid · one piece
← Backhoe excavator with a loader bucket All 14 excavators Front loader to work beside an excavator →