Front loader to work beside an excavator SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A wheel loader, the excavator’s partner on site, with its bucket raised and heaped with earth: two big tyres, a cab, an engine cover with an exhaust, and lift arms with their rams.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 100 × 58 mm (3.94 × 2.26 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 19: 1 outer edge and 18 cut-outs |
| Cut length | 801 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 150 curve and line segments |
Measured from the file. PNG: 2,000 × 1,183 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.58 in (25 × 15 mm) | 0.58 mm | 203 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.15 in (51 × 29 mm) | 1.2 mm | 407 mm | 45 | Vinyl, card and thin sheet |
| 3 × 1.73 in (76 × 44 mm) | 1.8 mm | 610 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.3 in (102 × 58 mm) | 2.3 mm | 814 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.45 in (152 × 88 mm) | 3.5 mm | 1,221 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.6 in (203 × 117 mm) | 4.7 mm | 1,628 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.9 in (305 × 175 mm) | 7 mm | 2,441 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More excavator SVG files
-
Dumptruck for an excavator to fill Solid · one piece -
Excavator loading a dump truck Solid · one piece -
Heavy equipment operator in an excavator cab Solid · one piece -
Excavator logo in a cog Solid · one piece -
Excavator outline Outline · one piece -
Layered excavator in four colours Layered · 13 pieces -
Excavator digger from the side Solid · one piece -
Excavator silhouette with a heap of earth Solid · one piece
← Skid steer, the excavator’s small helper All 14 excavators Dumptruck for an excavator to fill →