Free EMT SVG

EMT heart with a star and a heartbeat SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

EMT heart with a star and a heartbeat. The preview is the SVG file itself.

A solid heart with the plain six-barred star cut out of the middle and a heartbeat trace cut across it, running in from one side and out to the other. For the people at home who wait for the end of a shift.

What is in the file

Size	100 × 90 mm (3.94 × 3.56 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	620 mm at this size
Narrowest part	1.6 mm at this size
Nodes	62 curve and line segments

Measured from the file. PNG: 2,000 × 1,815 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.9 in (25 × 23 mm)	0.41 mm	157 mm	110	Too fine for most machines
2 × 1.81 in (51 × 46 mm)	0.81 mm	315 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.71 in (76 × 69 mm)	1.2 mm	472 mm	12	Vinyl, card and thin sheet
4 × 3.62 in (102 × 92 mm)	1.6 mm	630 mm	6	Vinyl, card and thin sheet
6 × 5.42 in (152 × 138 mm)	2.4 mm	945 mm	2	Vinyl, card and thin sheet
8 × 7.23 in (203 × 184 mm)	3.3 mm	1,260 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.85 in (305 × 276 mm)	4.9 mm	1,890 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More EMT SVG files

← EMT trauma shears All 13 EMTs EMT monogram star frame →