Free Eat SVG

Eat stencil plate SVG

Eat stencil plate, as a solid black shape — Eat stencil plate. The preview is the SVG file itself.

A rounded plate with “EAT” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 65 mm (3.94 × 2.54 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	874 mm at this size
Narrowest part	1.7 mm at this size
Nodes	43 curve and line segments

Measured from the file. PNG: 2,000 × 1,319 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.65 in (25 × 16 mm)	0.43 mm	222 mm	140	Too fine for most machines
2 × 1.29 in (51 × 33 mm)	0.86 mm	444 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.94 in (76 × 49 mm)	1.3 mm	666 mm	15	Vinyl, card and thin sheet
4 × 2.58 in (102 × 66 mm)	1.7 mm	888 mm	8	Vinyl, card and thin sheet
6 × 3.88 in (152 × 98 mm)	2.6 mm	1,332 mm	2	Vinyl, card and thin sheet
8 × 5.17 in (203 × 131 mm)	3.5 mm	1,776 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.75 in (305 × 197 mm)	5.2 mm	2,664 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Eat SVG files

← Eat outline lettering All 12 Eat designs Eat with a drop shadow →