Free Eat SVG

Eat in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Eat in Lilita One, as a solid black shape
Eat in Lilita One. The preview is the SVG file itself.

“Eat” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 54 mm (3.94 × 2.11 in), scales to any size
Pieces3 separate pieces
Outlines to cut4: 3 outer edges and 1 cut-out
Cut length532 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes92 curve and line segments

Measured from the file. PNG: 2,000 × 1,110 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.54 in (25 × 14 mm)Over 1.5 mm135 mm160Vinyl, card and thin sheet
2 × 1.07 in (51 × 27 mm)Over 3 mm270 mm45Any material, including 3 mm wood and acrylic
3 × 1.61 in (76 × 41 mm)Over 4.6 mm405 mm18Any material, including 3 mm wood and acrylic
4 × 2.15 in (102 × 55 mm)Over 6.1 mm541 mm10Any material, including 3 mm wood and acrylic
6 × 3.22 in (152 × 82 mm)Over 9.1 mm811 mm3Any material, including 3 mm wood and acrylic
8 × 4.3 in (203 × 109 mm)Over 12 mm1,081 mm2Any material, including 3 mm wood and acrylic
12 × 6.44 in (305 × 164 mm)Over 18 mm1,622 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Eat SVG files

← Eat in Kaushan Script All 13 Eat designs Eat in Alfa Slab One →