Free Eat SVG

Eat with a drop shadow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Eat with a drop shadow, in layered colours
Eat with a drop shadow. The preview is the SVG file itself.

“Eat” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

What is in the file

Size100 × 55 mm (3.94 × 2.18 in), scales to any size
Pieces2 separate pieces
Outlines to cut7: 2 outer edges and 5 cut-outs
Cut length1,193 mm at this size
Narrowest part3.8 mm at this size
Nodes234 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 1,140 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.55 in (25 × 14 mm)0.97 mm303 mm160Fine detail: vinyl and paper only, weed with care
2 × 1.11 in (51 × 28 mm)1.9 mm606 mm45Vinyl, card and thin sheet
3 × 1.66 in (76 × 42 mm)2.9 mm909 mm18Vinyl, card and thin sheet
4 × 2.21 in (102 × 56 mm)3.9 mm1,212 mm10Any material, including 3 mm wood and acrylic
6 × 3.32 in (152 × 84 mm)5.8 mm1,818 mm3Any material, including 3 mm wood and acrylic
8 × 4.42 in (203 × 112 mm)7.7 mm2,424 mm2Any material, including 3 mm wood and acrylic
12 × 6.64 in (305 × 169 mm)12 mm3,636 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Eat SVG files

← Eat stencil plate All 13 Eat designs Eat with a spoon and fork →