Free Easter egg SVG

Easter egg with a rabbit cut-out SVG

Easter egg with a rabbit cut-out, as a solid black shape
Easter egg with a rabbit cut-out. The preview is the SVG file itself.

A rabbit’s head with two upright ears cut from the middle of the egg, between two pairs of thin lines. Back it with patterned paper so the rabbit shows in colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size73 × 100 mm (2.89 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length802 mm at this size
Narrowest part3.4 mm at this size
Nodes93 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,488 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.73 × 1 in (19 × 25 mm)0.86 mm204 mm130Fine detail: vinyl and paper only, weed with care
1.47 × 2 in (37 × 51 mm)1.7 mm407 mm35Vinyl, card and thin sheet
2.2 × 3 in (56 × 76 mm)2.6 mm611 mm15Vinyl, card and thin sheet
2.94 × 4 in (75 × 102 mm)3.5 mm815 mm6Any material, including 3 mm wood and acrylic
4.4 × 6 in (112 × 152 mm)5.2 mm1,222 mm2Any material, including 3 mm wood and acrylic
5.87 × 8 in (149 × 203 mm)6.9 mm1,630 mm2Any material, including 3 mm wood and acrylic
8.81 × 12 in (224 × 305 mm)10 mm2,444 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Easter egg SVG files

← Easter egg with bunny ears All 19 Easter eggs Easter egg tied with a bow →