Free Easter egg SVG

Easter egg with bunny ears SVG

Easter egg with bunny ears, as a solid black shape
Easter egg with bunny ears. The preview is the SVG file itself.

An egg dressed as a rabbit: two long ears on top, round eyes, a small nose and whiskers, with a zigzag band and dots below. A favourite for children’s baskets and treat bags.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size57 × 100 mm (2.24 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut17: 1 outer edge and 16 cut-outs
Cut length802 mm at this size
Narrowest part2.8 mm at this size
Nodes190 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,169 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.57 × 1 in (14 × 25 mm)0.71 mm204 mm150Fine detail: vinyl and paper only, weed with care
1.14 × 2 in (29 × 51 mm)1.4 mm407 mm45Vinyl, card and thin sheet
1.7 × 3 in (43 × 76 mm)2.1 mm611 mm18Vinyl, card and thin sheet
2.27 × 4 in (58 × 102 mm)2.8 mm815 mm8Vinyl, card and thin sheet
3.41 × 6 in (87 × 152 mm)4.3 mm1,222 mm3Any material, including 3 mm wood and acrylic
4.54 × 8 in (115 × 203 mm)5.7 mm1,630 mm2Any material, including 3 mm wood and acrylic
6.82 × 12 in (173 × 305 mm)8.5 mm2,444 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Easter egg SVG files

← Easter egg with a hatching chick All 19 Easter eggs Easter egg with a rabbit cut-out →