Don’t Moose With Me stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “DON’T MOOSE WITH ME” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 97 × 100 mm (3.81 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 17: 1 outer edge and 16 cut-outs |
| Cut length | 1,892 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 344 curve and line segments |
Measured from the file. PNG: 1,937 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.97 × 1 in (25 × 25 mm) | 0.43 mm | 481 mm | 100 | Too fine for most machines |
| 1.93 × 2 in (49 × 51 mm) | 0.86 mm | 961 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 2.9 × 3 in (74 × 76 mm) | 1.3 mm | 1,442 mm | 9 | Vinyl, card and thin sheet |
| 3.87 × 4 in (98 × 102 mm) | 1.7 mm | 1,922 mm | 6 | Vinyl, card and thin sheet |
| 5.8 × 6 in (147 × 152 mm) | 2.6 mm | 2,883 mm | 2 | Vinyl, card and thin sheet |
| 7.74 × 8 in (196 × 203 mm) | 3.5 mm | 3,845 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.6 × 12 in (295 × 305 mm) | 5.2 mm | 5,767 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Don’t Moose With Me SVG files
-
Don’t Moose With Me with a drop shadow Layered · 14 pieces -
Don’t Moose With Me in Pacifico Solid · 8 pieces -
Don’t Moose With Me in Lobster Solid · 11 pieces -
Don’t Moose With Me in Kaushan Script Solid · 17 pieces -
Don’t Moose With Me in Lilita One Solid · 17 pieces -
Don’t Moose With Me in Alfa Slab One Solid · 17 pieces -
Don’t Moose With Me in Amatic SC Solid · 16 pieces -
Don’t Moose With Me in block capitals Solid · 16 pieces
← Don’t Moose With Me outline lettering All 12 Don’t Moose With Me designs Don’t Moose With Me with a drop shadow →