Don’t Moose With Me in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Don’t Moose With Me” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 80 mm (3.94 × 3.13 in), scales to any size |
|---|---|
| Pieces | 17 separate pieces |
| Outlines to cut | 23: 17 outer edges and 6 cut-outs |
| Cut length | 1,142 mm at this size |
| Narrowest part | 3.9 mm at this size |
| Nodes | 312 curve and line segments |
Measured from the file. PNG: 2,000 × 1,608 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.8 in (25 × 20 mm) | 0.99 mm | 290 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.59 in (51 × 40 mm) | 2 mm | 580 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.39 in (76 × 61 mm) | 3 mm | 870 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.18 in (102 × 81 mm) | 4 mm | 1,160 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.78 in (152 × 121 mm) | 5.9 mm | 1,740 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.37 in (203 × 162 mm) | 7.9 mm | 2,321 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.55 in (305 × 243 mm) | 12 mm | 3,481 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Don’t Moose With Me SVG files
-
Don’t Moose With Me in Alfa Slab One Solid · 17 pieces -
Don’t Moose With Me in Amatic SC Solid · 16 pieces -
Don’t Moose With Me in block capitals Solid · 16 pieces -
Don’t Moose With Me in script and capitals Solid · 15 pieces -
Don’t Moose With Me with stars Solid · 17 pieces -
Don’t Moose With Me outline lettering Outline · 21 pieces -
Don’t Moose With Me stencil plate Solid · one piece -
Don’t Moose With Me with a drop shadow Layered · 14 pieces
← Don’t Moose With Me in Kaushan Script All 12 Don’t Moose With Me designs Don’t Moose With Me in Alfa Slab One →