Don’t Moose With Me in Amatic SC SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Don’t Moose With Me” set in Amatic SC, narrow hand-drawn capitals, on 3 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.
What is in the file
| Size | 69 × 100 mm (2.73 × 3.94 in), scales to any size |
|---|---|
| Pieces | 16 separate pieces |
| Outlines to cut | 20: 16 outer edges and 4 cut-outs |
| Cut length | 1,462 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 574 curve and line segments |
Measured from the file. PNG: 1,412 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.69 × 1 in (18 × 25 mm) | 0.25 mm | 371 mm | 130 | Too fine for most machines |
| 1.39 × 2 in (35 × 51 mm) | 0.51 mm | 743 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 2.08 × 3 in (53 × 76 mm) | 0.76 mm | 1,114 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 2.78 × 4 in (71 × 102 mm) | 1 mm | 1,485 mm | 8 | Vinyl, card and thin sheet |
| 4.16 × 6 in (106 × 152 mm) | 1.5 mm | 2,228 mm | 2 | Vinyl, card and thin sheet |
| 5.55 × 8 in (141 × 203 mm) | 2 mm | 2,971 mm | 2 | Vinyl, card and thin sheet |
| 8.33 × 12 in (212 × 305 mm) | 3 mm | 4,456 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Don’t Moose With Me SVG files
-
Don’t Moose With Me in block capitals Solid · 16 pieces -
Don’t Moose With Me in script and capitals Solid · 15 pieces -
Don’t Moose With Me with stars Solid · 17 pieces -
Don’t Moose With Me outline lettering Outline · 21 pieces -
Don’t Moose With Me stencil plate Solid · one piece -
Don’t Moose With Me with a drop shadow Layered · 14 pieces -
Don’t Moose With Me in Pacifico Solid · 8 pieces -
Don’t Moose With Me in Lobster Solid · 11 pieces
← Don’t Moose With Me in Alfa Slab One All 12 Don’t Moose With Me designs Don’t Moose With Me in block capitals →