Día de los Muertos sugar skull for a name SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A sugar skull with scalloped eyes and its brow left plain between two fine rules, where the real ones carry a name in icing. One piece, the same on both sides. The plain space is 39 mm wide and 18 mm tall at 100 mm tall.
What is in the file
| Size | 84 × 100 mm (3.31 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 28: 1 outer edge and 27 cut-outs |
| Cut length | 987 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 262 curve and line segments |
| Symmetry | Mirror |
| Also found as | Sugar skull monogram SVG |
Measured from the file. PNG: 1,694 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.84 × 1 in (21 × 25 mm) | 0.51 mm | 251 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 1.68 × 2 in (43 × 51 mm) | 1 mm | 501 mm | 30 | Vinyl, card and thin sheet |
| 2.52 × 3 in (64 × 76 mm) | 1.5 mm | 752 mm | 12 | Vinyl, card and thin sheet |
| 3.36 × 4 in (85 × 102 mm) | 2 mm | 1,003 mm | 6 | Vinyl, card and thin sheet |
| 5.05 × 6 in (128 × 152 mm) | 3 mm | 1,504 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.73 × 8 in (171 × 203 mm) | 4.1 mm | 2,006 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.09 × 12 in (256 × 305 mm) | 6.1 mm | 3,008 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Día de los Muertos SVG files
-
Día de los Muertos Catrina in a feathered hat Solid · one piece -
Día de los Muertos sugar skull cat Solid · one piece -
Día de los Muertos sugar skull mask to wear Solid · one piece -
Día de los Muertos marigold Solid · one piece -
Día de los Muertos papel picado banner Solid · one piece -
Día de los Muertos altar silhouette Solid · one piece -
Día de los Muertos bread of the dead Solid · one piece -
Día de los Muertos candles with marigolds Solid · one piece
← Día de los Muertos sugar skulls, a pair All 13 Día de los Muertos designs Día de los Muertos Catrina in a feathered hat →