Día de los Muertos sugar skull mask to wear SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A half mask: the top of a sugar skull down to the upper teeth, with open eyes ringed with petals, a notch for the nose, two teeth a side and a hole at each temple for elastic. One piece. The eyes are 42 mm apart, centre to centre, at 100 mm wide.
What is in the file
| Size | 100 × 95 mm (3.94 × 3.76 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 28: 1 outer edge and 27 cut-outs |
| Cut length | 1,130 mm at this size |
| Narrowest part | 2.7 mm at this size |
| Nodes | 255 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,912 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.95 in (25 × 24 mm) | 0.69 mm | 287 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.91 in (51 × 48 mm) | 1.4 mm | 574 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.86 in (76 × 73 mm) | 2.1 mm | 861 mm | 9 | Vinyl, card and thin sheet |
| 4 × 3.82 in (102 × 97 mm) | 2.7 mm | 1,148 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.72 in (152 × 145 mm) | 4.1 mm | 1,722 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.63 in (203 × 194 mm) | 5.5 mm | 2,296 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.45 in (305 × 291 mm) | 8.2 mm | 3,444 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Día de los Muertos SVG files
-
Día de los Muertos marigold Solid · one piece -
Día de los Muertos papel picado banner Solid · one piece -
Día de los Muertos altar silhouette Solid · one piece -
Día de los Muertos bread of the dead Solid · one piece -
Día de los Muertos candles with marigolds Solid · one piece -
Día de los Muertos marigold wreath, blank Solid · one piece -
Día de los Muertos sugar skull outline Outline · one piece -
Layered Día de los Muertos sugar skull Layered · 48 pieces
← Día de los Muertos sugar skull cat All 13 Día de los Muertos designs Día de los Muertos marigold →