Día de los Muertos papel picado banner SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Three flags of cut paper on a sagging string: a skull between two marigolds, each held in its window by four struts, with a row of holes along the top and a scalloped foot. One piece, the same on both sides.
What is in the file
| Size | 100 × 40 mm (3.94 × 1.59 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 52: 1 outer edge and 51 cut-outs |
| Cut length | 968 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 366 curve and line segments |
| Symmetry | Mirror |
| Also found as | Day of the dead banner SVG |
Measured from the file. PNG: 2,000 × 854 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.4 in (25 × 10 mm) | 0.53 mm | 246 mm | 200 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.81 in (51 × 21 mm) | 1.1 mm | 492 mm | 60 | Vinyl, card and thin sheet |
| 3 × 1.21 in (76 × 31 mm) | 1.6 mm | 738 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.62 in (102 × 41 mm) | 2.1 mm | 983 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.42 in (152 × 62 mm) | 3.2 mm | 1,475 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.23 in (203 × 82 mm) | 4.3 mm | 1,967 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.85 in (305 × 123 mm) | 6.4 mm | 2,950 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Día de los Muertos SVG files
-
Día de los Muertos altar silhouette Solid · one piece -
Día de los Muertos bread of the dead Solid · one piece -
Día de los Muertos candles with marigolds Solid · one piece -
Día de los Muertos marigold wreath, blank Solid · one piece -
Día de los Muertos sugar skull outline Outline · one piece -
Layered Día de los Muertos sugar skull Layered · 48 pieces -
Día de los Muertos sugar skulls, a pair Solid · one piece -
Día de los Muertos sugar skull for a name Solid · one piece
← Día de los Muertos marigold All 13 Día de los Muertos designs Día de los Muertos altar silhouette →