Free dentist SVG

Dentist smile with a sparkle SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dentist smile with a sparkle, as a solid black shape
Dentist smile with a sparkle. The preview is the SVG file itself.

A broad smile: full lips with seven upper and seven lower teeth showing clear between them, and a four-point sparkle at one corner. Two pieces: the smile and its sparkle.

What is in the file

Size100 × 68 mm (3.94 × 2.66 in), scales to any size
Pieces2 separate pieces
Outlines to cut16: 2 outer edges and 14 cut-outs
Cut length781 mm at this size
Narrowest part1.8 mm at this size
Nodes86 curve and line segments

Measured from the file. PNG: 2,000 × 1,375 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.68 in (25 × 17 mm)0.46 mm198 mm130Too fine for most machines
2 × 1.35 in (51 × 34 mm)0.91 mm397 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.03 in (76 × 51 mm)1.4 mm595 mm15Vinyl, card and thin sheet
4 × 2.7 in (102 × 69 mm)1.8 mm793 mm8Vinyl, card and thin sheet
6 × 4.05 in (152 × 103 mm)2.7 mm1,190 mm2Vinyl, card and thin sheet
8 × 5.4 in (203 × 137 mm)3.7 mm1,587 mm2Any material, including 3 mm wood and acrylic
12 × 8.1 in (305 × 206 mm)5.5 mm2,380 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dentist SVG files

← Dentist chart of both arches All 15 dentists Dentist’s orders: brush, paste and floss →