Free dentist SVG

Dentist with a mouth mirror SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dentist with a mouth mirror, as a solid black shape
Dentist with a mouth mirror. The preview is the SVG file itself.

A dentist seen from the front in a knee-length coat, one hand on the hip and the other holding up a mouth mirror. The lapels, the front edge and two pockets are cut as fine lines.

What is in the file

Size63 × 100 mm (2.5 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length598 mm at this size
Narrowest part2.6 mm at this size
Nodes124 curve and line segments

Measured from the file. PNG: 1,296 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.63 × 1 in (16 × 25 mm)0.66 mm152 mm140Fine detail: vinyl and paper only, weed with care
1.27 × 2 in (32 × 51 mm)1.3 mm304 mm40Vinyl, card and thin sheet
1.9 × 3 in (48 × 76 mm)2 mm456 mm15Vinyl, card and thin sheet
2.54 × 4 in (64 × 102 mm)2.6 mm608 mm8Vinyl, card and thin sheet
3.8 × 6 in (97 × 152 mm)4 mm911 mm3Any material, including 3 mm wood and acrylic
5.07 × 8 in (129 × 203 mm)5.3 mm1,215 mm2Any material, including 3 mm wood and acrylic
7.61 × 12 in (193 × 305 mm)7.9 mm1,823 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dentist SVG files

← Dentist chair with a lamp All 15 dentists Dentist silhouette beside the chair →