Free cross SVG

Decorative cross with cut diamonds SVG

Decorative cross with cut diamonds, as a solid black shape — Decorative cross with cut diamonds. The preview is the SVG file itself.

A pointed cross pierced with a diamond along each arm and a round hole at the crossing. Back it with a second colour so the diamonds show.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	66 × 100 mm (2.6 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	459 mm at this size
Narrowest part	3.5 mm at this size
Nodes	44 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,346 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.66 × 1 in (17 × 25 mm)	0.89 mm	117 mm	140	Fine detail: vinyl and paper only, weed with care
1.32 × 2 in (34 × 51 mm)	1.8 mm	233 mm	40	Vinyl, card and thin sheet
1.98 × 3 in (50 × 76 mm)	2.7 mm	350 mm	15	Vinyl, card and thin sheet
2.64 × 4 in (67 × 102 mm)	3.6 mm	466 mm	8	Any material, including 3 mm wood and acrylic
3.96 × 6 in (101 × 152 mm)	5.3 mm	700 mm	2	Any material, including 3 mm wood and acrylic
5.28 × 8 in (134 × 203 mm)	7.1 mm	933 mm	2	Any material, including 3 mm wood and acrylic
7.92 × 12 in (201 × 305 mm)	11 mm	1,399 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cross SVG files

← Lattice cross All 17 crosses Cross pendant with a loop →