Free crawfish SVG

Crawfish claw SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Crawfish claw, as a solid black shape
Crawfish claw. The preview is the SVG file itself.

One big claw on its jointed arm: a swollen palm, two fingers that hook towards each other, three small teeth on the cutting edge and a crease at each joint. For key rings, earrings and the corner of a menu.

What is in the file

Size33 × 100 mm (1.3 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length324 mm at this size
Narrowest part1.6 mm at this size
Nodes108 curve and line segments

Measured from the file. PNG: 713 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.33 × 1 in (8 × 25 mm)0.41 mm82 mm220Too fine for most machines
0.66 × 2 in (17 × 51 mm)0.81 mm165 mm70Fine detail: vinyl and paper only, weed with care
0.99 × 3 in (25 × 76 mm)1.2 mm247 mm30Vinyl, card and thin sheet
1.32 × 4 in (34 × 102 mm)1.6 mm329 mm16Vinyl, card and thin sheet
1.99 × 6 in (50 × 152 mm)2.4 mm494 mm5Vinyl, card and thin sheet
2.65 × 8 in (67 × 203 mm)3.3 mm658 mm4Any material, including 3 mm wood and acrylic
3.97 × 12 in (101 × 305 mm)4.9 mm988 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More crawfish SVG files

← Two crawfish with a heart All 12 crawfish Crawfish in a heart →