Free crawfish SVG

Crawfish in a round badge SVG

Crawfish in a round badge. The preview is the SVG file itself.

A crawfish with its claws spread inside a ring, the claws and the tail fan welded to the ring so the whole badge is one piece. Made for round stickers, coasters and the lid of a boil pot.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	25: 1 outer edge and 24 cut-outs
Cut length	1,499 mm at this size
Narrowest part	1.9 mm at this size
Nodes	611 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.48 mm	381 mm	100	Too fine for most machines
2 × 2 in (51 × 51 mm)	0.97 mm	761 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)	1.4 mm	1,142 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	1.9 mm	1,523 mm	4	Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)	2.9 mm	2,284 mm	1	Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)	3.9 mm	3,046 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	5.8 mm	4,569 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More crawfish SVG files

← Crawfish in a heart All 12 crawfish Crawfish outline →