Free confetti SVG

Clover confetti SVG

Clover confetti, as a solid black shape — Clover confetti. The preview is the SVG file itself.

Three-leaf clovers in three sizes with small dots between them, each clover built from three hearts and a stem. For St Patrick’s Day tables, cards and shirts.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.92 × 3.94 in), scales to any size
Pieces	30 separate pieces
Outlines to cut	30 outlines
Cut length	1,170 mm at this size
Narrowest part	1.7 mm at this size
Nodes	397 curve and line segments

Measured from the file. PNG: 1,990 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.43 mm	297 mm	100	Too fine for most machines
1.99 × 2 in (51 × 51 mm)	0.86 mm	594 mm	25	Fine detail: vinyl and paper only, weed with care
2.99 × 3 in (76 × 76 mm)	1.3 mm	892 mm	9	Vinyl, card and thin sheet
3.98 × 4 in (101 × 102 mm)	1.7 mm	1,189 mm	4	Vinyl, card and thin sheet
5.97 × 6 in (152 × 152 mm)	2.6 mm	1,783 mm	1	Vinyl, card and thin sheet
7.96 × 8 in (202 × 203 mm)	3.5 mm	2,377 mm	1	Any material, including 3 mm wood and acrylic
11.94 × 12 in (303 × 305 mm)	5.2 mm	3,566 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More confetti SVG files

← Party horn with confetti All 16 confetti Glitter confetti with sparkles →