Free Coffee Teach Repeat SVG

Coffee Teach Repeat stencil plate SVG

Coffee Teach Repeat stencil plate, as a solid black shape
Coffee Teach Repeat stencil plate. The preview is the SVG file itself.

A rounded plate with “COFFEE TEACH REPEAT” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size97 × 100 mm (3.83 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut18: 1 outer edge and 17 cut-outs
Cut length1,900 mm at this size
Narrowest part1.3 mm at this size
Nodes403 curve and line segments

Measured from the file. PNG: 1,948 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.97 × 1 in (25 × 25 mm)0.33 mm483 mm100Too fine for most machines
1.95 × 2 in (49 × 51 mm)0.66 mm965 mm25Fine detail: vinyl and paper only, weed with care
2.92 × 3 in (74 × 76 mm)0.99 mm1,448 mm9Fine detail: vinyl and paper only, weed with care
3.89 × 4 in (99 × 102 mm)1.3 mm1,930 mm4Vinyl, card and thin sheet
5.84 × 6 in (148 × 152 mm)2 mm2,896 mm2Vinyl, card and thin sheet
7.78 × 8 in (198 × 203 mm)2.6 mm3,861 mm1Vinyl, card and thin sheet
11.68 × 12 in (297 × 305 mm)4 mm5,791 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Coffee Teach Repeat SVG files

← Coffee Teach Repeat outline lettering All 12 Coffee Teach Repeat designs Coffee Teach Repeat with a drop shadow →