Free Coffee Teach Repeat SVG

Coffee Teach Repeat outline lettering SVG

Coffee Teach Repeat outline lettering, drawn as a line
Coffee Teach Repeat outline lettering. The preview is the SVG file itself.

“Coffee Teach Repeat” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.93 in), scales to any size
Pieces25 separate pieces
Outlines to cut52: 25 outer edges and 27 cut-outs
Cut length2,417 mm at this size
Narrowest part1.4 mm at this size
Nodes700 curve and line segments

Measured from the file. PNG: 2,000 × 1,996 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.36 mm614 mm100Too fine for most machines
2 × 2 in (51 × 51 mm)0.71 mm1,228 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.99 in (76 × 76 mm)1.1 mm1,842 mm9Vinyl, card and thin sheet
4 × 3.99 in (102 × 101 mm)1.4 mm2,456 mm4Vinyl, card and thin sheet
6 × 5.99 in (152 × 152 mm)2.1 mm3,684 mm1Vinyl, card and thin sheet
8 × 7.98 in (203 × 203 mm)2.8 mm4,911 mm1Vinyl, card and thin sheet
12 × 11.98 in (305 × 304 mm)4.3 mm7,367 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Coffee Teach Repeat SVG files

← Coffee Teach Repeat with hearts All 12 Coffee Teach Repeat designs Coffee Teach Repeat stencil plate →