Free Coffee Teach Repeat SVG

Coffee Teach Repeat in Amatic SC SVG

Coffee Teach Repeat in Amatic SC, as a solid black shape
Coffee Teach Repeat in Amatic SC. The preview is the SVG file itself.

“Coffee Teach Repeat” set in Amatic SC, narrow hand-drawn capitals, on 3 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size54 × 100 mm (2.13 × 3.94 in), scales to any size
Pieces17 separate pieces
Outlines to cut22: 17 outer edges and 5 cut-outs
Cut length1,280 mm at this size
Narrowest part1 mm at this size
Nodes556 curve and line segments

Measured from the file. PNG: 1,117 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.54 × 1 in (14 × 25 mm)0.25 mm325 mm160Too fine for most machines
1.08 × 2 in (27 × 51 mm)0.51 mm650 mm45Fine detail: vinyl and paper only, weed with care
1.62 × 3 in (41 × 76 mm)0.76 mm975 mm18Fine detail: vinyl and paper only, weed with care
2.16 × 4 in (55 × 102 mm)1 mm1,300 mm10Vinyl, card and thin sheet
3.25 × 6 in (82 × 152 mm)1.5 mm1,951 mm3Vinyl, card and thin sheet
4.33 × 8 in (110 × 203 mm)2 mm2,601 mm2Vinyl, card and thin sheet
6.49 × 12 in (165 × 305 mm)3 mm3,901 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Coffee Teach Repeat SVG files

← Coffee Teach Repeat in Alfa Slab One All 12 Coffee Teach Repeat designs Coffee Teach Repeat in block capitals →