Free coffee cup SVG

To go coffee cup SVG

To go coffee cup, as a solid black shape
To go coffee cup. The preview is the SVG file itself.

A paper cup with a flat lid, a sip spout and a plain sleeve round the middle. The sleeve is blank, with a cut line above and below it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size62 × 100 mm (2.46 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length564 mm at this size
Narrowest part3.6 mm at this size
Nodes49 curve and line segments

Measured from the file. PNG: 1,277 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.62 × 1 in (16 × 25 mm)0.91 mm143 mm140Fine detail: vinyl and paper only, weed with care
1.25 × 2 in (32 × 51 mm)1.8 mm287 mm40Vinyl, card and thin sheet
1.87 × 3 in (48 × 76 mm)2.7 mm430 mm15Vinyl, card and thin sheet
2.5 × 4 in (63 × 102 mm)3.7 mm573 mm8Any material, including 3 mm wood and acrylic
3.74 × 6 in (95 × 152 mm)5.5 mm860 mm3Any material, including 3 mm wood and acrylic
4.99 × 8 in (127 × 203 mm)7.3 mm1,146 mm2Any material, including 3 mm wood and acrylic
7.49 × 12 in (190 × 305 mm)11 mm1,719 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More coffee cup SVG files

← Latte from above with a heart All 19 coffee cups Small takeaway coffee cup with a heart →