Free coffee cup SVG

Latte from above with a heart SVG

Latte from above with a heart, as a solid black shape — Latte from above with a heart. The preview is the SVG file itself.

A cup and saucer seen from straight above: the saucer as a ring, a latte-art heart poured in the middle of the cup, and the handle bridging cup and saucer so it all stays one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	1,201 mm at this size
Narrowest part	3.6 mm at this size
Nodes	106 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.91 mm	305 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)	1.8 mm	610 mm	25	Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)	2.7 mm	915 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	3.7 mm	1,220 mm	4	Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)	5.5 mm	1,830 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	7.3 mm	2,440 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	11 mm	3,661 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More coffee cup SVG files

← Espresso cup All 19 coffee cups To go coffee cup →