Free chihuahua SVG

Chihuahua sitting on a bone SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Chihuahua sitting on a bone, as a solid black shape
Chihuahua sitting on a bone. The preview is the SVG file itself.

A sitting chihuahua welded to the top of a big blank bone that is longer than the dog. The bone is a name plate: cut a name out of it, or cut the name from a second colour and stick it on.

What is in the file

Size89 × 100 mm (3.49 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length599 mm at this size
Narrowest part3.1 mm at this size
Nodes194 curve and line segments

Measured from the file. PNG: 1,781 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.89 × 1 in (23 × 25 mm)0.79 mm152 mm110Fine detail: vinyl and paper only, weed with care
1.77 × 2 in (45 × 51 mm)1.6 mm304 mm30Vinyl, card and thin sheet
2.66 × 3 in (68 × 76 mm)2.4 mm456 mm12Vinyl, card and thin sheet
3.54 × 4 in (90 × 102 mm)3.1 mm609 mm6Any material, including 3 mm wood and acrylic
5.32 × 6 in (135 × 152 mm)4.7 mm913 mm2Any material, including 3 mm wood and acrylic
7.09 × 8 in (180 × 203 mm)6.3 mm1,217 mm1Any material, including 3 mm wood and acrylic
10.63 × 12 in (270 × 305 mm)9.4 mm1,826 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More chihuahua SVG files

← Chihuahua in a heart All 14 chihuahuas Chihuahua outline →