Free chihuahua SVG

Chihuahua paw print badge SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Chihuahua paw print badge. The preview is the SVG file itself.

A paw print with the chihuahua face in place of the big pad, its ears spread between the toe pads above. Five loose pieces set out in position, for car windows, carrier bags and kennel signs.

What is in the file

Size	100 × 90 mm (3.94 × 3.52 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	10: 5 outer edges and 5 cut-outs
Cut length	671 mm at this size
Narrowest part	2.5 mm at this size
Nodes	159 curve and line segments

Measured from the file. PNG: 2,000 × 1,798 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.9 in (25 × 23 mm)	0.64 mm	170 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.79 in (51 × 45 mm)	1.3 mm	341 mm	30	Vinyl, card and thin sheet
3 × 2.69 in (76 × 68 mm)	1.9 mm	511 mm	12	Vinyl, card and thin sheet
4 × 3.58 in (102 × 91 mm)	2.5 mm	682 mm	6	Vinyl, card and thin sheet
6 × 5.37 in (152 × 136 mm)	3.8 mm	1,023 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.16 in (203 × 182 mm)	5.1 mm	1,363 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.74 in (305 × 273 mm)	7.6 mm	2,045 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More chihuahua SVG files

← Chihuahua outline All 14 chihuahuas Chihuahua monogram frame →