Chevron heart SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A heart made of zigzag stripes, cut off cleanly at its edge. The stripes are loose pieces, so lift it with transfer tape.
What is in the file
| Size | 100 × 84 mm (3.94 × 3.3 in), scales to any size |
|---|---|
| Pieces | 8 separate pieces |
| Outlines to cut | 8 outlines |
| Cut length | 1,167 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 116 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,690 pixels, transparent. About the three file types.
How fine is it at your size?
Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.84 in (25 × 21 mm) | 0.58 mm | 296 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.68 in (51 × 43 mm) | 1.2 mm | 593 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.52 in (76 × 64 mm) | 1.8 mm | 889 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.36 in (102 × 85 mm) | 2.3 mm | 1,186 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.03 in (152 × 128 mm) | 3.5 mm | 1,779 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.71 in (203 × 170 mm) | 4.7 mm | 2,371 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.07 in (305 × 256 mm) | 7 mm | 3,557 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.