Free chevron SVG

Single chevron shape SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Single chevron shape, as a solid black shape
Single chevron shape. The preview is the SVG file itself.

One bold chevron pointing up: two arms at a right angle, each 21 mm wide, cut off upright at the ends. The building block for arrows, road markings and stacked stripes.

What is in the file

Size100 × 80 mm (3.94 × 3.15 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length343 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes6 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,615 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.8 in (25 × 20 mm)Over 1.5 mm87 mm120Vinyl, card and thin sheet
2 × 1.6 in (51 × 41 mm)Over 3 mm174 mm30Any material, including 3 mm wood and acrylic
3 × 2.4 in (76 × 61 mm)Over 4.6 mm261 mm12Any material, including 3 mm wood and acrylic
4 × 3.2 in (102 × 81 mm)Over 6.1 mm348 mm6Any material, including 3 mm wood and acrylic
6 × 4.8 in (152 × 122 mm)Over 9.1 mm523 mm2Any material, including 3 mm wood and acrylic
8 × 6.4 in (203 × 163 mm)Over 12 mm697 mm1Any material, including 3 mm wood and acrylic
12 × 9.6 in (305 × 244 mm)Over 18 mm1,045 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More chevron SVG files

← Chevron circle All 21 chevrons Double chevron →