Free cheetah SVG

Layered cheetah in three colours SVG

Layered cheetah in three colours, in layered colours
Layered cheetah in three colours. The preview is the SVG file itself.

Three layers to stack, running to the right: a sandy cheetah, a white chest, belly and inner legs, and the black spots, tear line, eye and tail bands. The spots cut as loose dots, so move them with transfer tape.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 28 mm (3.94 × 1.09 in), scales to any size
Pieces40 separate pieces
Outlines to cut42: 40 outer edges and 2 cut-outs
Cut length705 mm at this size
Narrowest part3.2 mm at this size
Nodes351 curve and line segments
Layers3: cheetah, underside and spots

Measured from the file. PNG: 2,000 × 612 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.28 in (25 × 7 mm)0.81 mm179 mm250Fine detail: vinyl and paper only, weed with care
2 × 0.56 in (51 × 14 mm)1.6 mm358 mm80Vinyl, card and thin sheet
3 × 0.83 in (76 × 21 mm)2.4 mm537 mm33Vinyl, card and thin sheet
4 × 1.11 in (102 × 28 mm)3.3 mm716 mm18Any material, including 3 mm wood and acrylic
6 × 1.67 in (152 × 42 mm)4.9 mm1,074 mm6Any material, including 3 mm wood and acrylic
8 × 2.22 in (203 × 56 mm)6.5 mm1,433 mm5Any material, including 3 mm wood and acrylic
12 × 3.34 in (305 × 85 mm)9.8 mm2,149 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cheetah SVG files

← Cheetah outline with spots All 12 cheetahs Running cheetah →