Sprinting cheetah with legs gathered SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The other half of a cheetah's stride: back arched, all four feet bunched under the body with the hind paws swung ahead of the front ones, and the tail up for balance. Pair it with the running cheetah.
What is in the file
| Size | 100 × 51 mm (3.94 × 1.99 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 42: 1 outer edge and 41 cut-outs |
| Cut length | 576 mm at this size |
| Narrowest part | 1.1 mm at this size |
| Nodes | 293 curve and line segments |
Measured from the file. PNG: 2,000 × 1,048 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.51 in (25 × 13 mm) | 0.28 mm | 146 mm | 170 | Too fine for most machines |
| 2 × 1.01 in (51 × 26 mm) | 0.56 mm | 293 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.52 in (76 × 38 mm) | 0.84 mm | 439 mm | 21 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.02 in (102 × 51 mm) | 1.1 mm | 585 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.03 in (152 × 77 mm) | 1.7 mm | 878 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.04 in (203 × 103 mm) | 2.2 mm | 1,170 mm | 2 | Vinyl, card and thin sheet |
| 12 × 6.06 in (305 × 154 mm) | 3.4 mm | 1,756 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.