Free cheetah SVG

Cheetah face SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cheetah face, as a solid black shape
Cheetah face. The preview is the SVG file itself.

A cheetah face from the front: a small round head, low round ears, and the two black tear lines that run from the eyes round the muzzle to the corners of the mouth. Spotted brow and cheeks, exactly mirrored.

What is in the file

Size100 × 98 mm (3.94 × 3.87 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut36: 1 outer edge and 35 cut-outs
Cut length1,170 mm at this size
Narrowest part2.3 mm at this size
Nodes415 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,965 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.98 in (25 × 25 mm)0.58 mm297 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.96 in (51 × 50 mm)1.2 mm594 mm25Vinyl, card and thin sheet
3 × 2.95 in (76 × 75 mm)1.8 mm892 mm9Vinyl, card and thin sheet
4 × 3.93 in (102 × 100 mm)2.3 mm1,189 mm4Vinyl, card and thin sheet
6 × 5.89 in (152 × 150 mm)3.5 mm1,783 mm2Any material, including 3 mm wood and acrylic
8 × 7.86 in (203 × 200 mm)4.7 mm2,377 mm1Any material, including 3 mm wood and acrylic
12 × 11.78 in (305 × 299 mm)7 mm3,566 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cheetah SVG files

← Cheetah lying on a mound All 12 cheetahs Cheetah cub →