Free cheerleader SVG

Three cheerleaders in a row SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Three cheerleaders in a row, as a solid black shape
Three cheerleaders in a row. The preview is the SVG file itself.

Three cheerleaders on one line: the middle one in a high V, the two beside her each with one pom pom up and a fist on the hip. A strip of ground joins them into one piece.

What is in the file

Size100 × 100 mm (3.93 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut13: 1 outer edge and 12 cut-outs
Cut length1,397 mm at this size
Narrowest part1 mm at this size
Nodes410 curve and line segments
Also found asCheerleaders silhouette SVG

Measured from the file. PNG: 1,996 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.25 mm355 mm100Too fine for most machines
2 × 2 in (51 × 51 mm)0.51 mm710 mm25Fine detail: vinyl and paper only, weed with care
2.99 × 3 in (76 × 76 mm)0.76 mm1,065 mm9Fine detail: vinyl and paper only, weed with care
3.99 × 4 in (101 × 102 mm)1 mm1,419 mm4Vinyl, card and thin sheet
5.99 × 6 in (152 × 152 mm)1.5 mm2,129 mm1Vinyl, card and thin sheet
7.98 × 8 in (203 × 203 mm)2 mm2,839 mm1Vinyl, card and thin sheet
11.98 × 12 in (304 × 305 mm)3 mm4,258 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cheerleader SVG files

← Male cheerleader with a megaphone All 14 cheerleaders Cheerleader bow →