Free cheerleader SVG

Cheerleader herkie jump SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cheerleader herkie jump, as a solid black shape
Cheerleader herkie jump. The preview is the SVG file itself.

A herkie caught in the air: one leg straight out to the side, the other tucked under, one arm punching up with a pom pom and the other fist on the hip. One piece.

What is in the file

Size80 × 100 mm (3.15 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length520 mm at this size
Narrowest part3.6 mm at this size
Nodes148 curve and line segments

Measured from the file. PNG: 1,615 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.8 × 1 in (20 × 25 mm)0.91 mm132 mm120Fine detail: vinyl and paper only, weed with care
1.6 × 2 in (41 × 51 mm)1.8 mm264 mm30Vinyl, card and thin sheet
2.4 × 3 in (61 × 76 mm)2.7 mm396 mm12Vinyl, card and thin sheet
3.2 × 4 in (81 × 102 mm)3.7 mm528 mm6Any material, including 3 mm wood and acrylic
4.8 × 6 in (122 × 152 mm)5.5 mm792 mm2Any material, including 3 mm wood and acrylic
6.4 × 8 in (163 × 203 mm)7.3 mm1,057 mm1Any material, including 3 mm wood and acrylic
9.6 × 12 in (244 × 305 mm)11 mm1,585 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cheerleader SVG files

← Cheerleader toe touch jump All 14 cheerleaders Cheerleader flyer in a liberty →