Free checkerboard SVG

Waving checkered flag SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Waving checkered flag, as a solid black shape
Waving checkered flag. The preview is the SVG file itself.

A racing flag caught mid-wave: the checks ripple more the further they are from the pole. One welded piece, leaning as if it has just been swung.

What is in the file

Size91 × 100 mm (3.57 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut21: 1 outer edge and 20 cut-outs
Cut length1,037 mm at this size
Narrowest join1.8 mm at this size
Thinnest wall between cut-outs1.6 mm at this size
Nodes160 curve and line segments

Measured from the file. PNG: 1,819 × 2,000 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest joinCut lengthFit on a 12 in sheetRule of thumb
0.91 × 1 in (23 × 25 mm)0.46 mm263 mm110Too fine for most machines
1.81 × 2 in (46 × 51 mm)0.91 mm527 mm30Fine detail: vinyl and paper only, weed with care
2.72 × 3 in (69 × 76 mm)1.4 mm790 mm12Vinyl, card and thin sheet
3.62 × 4 in (92 × 102 mm)1.8 mm1,054 mm6Vinyl, card and thin sheet
5.44 × 6 in (138 × 152 mm)2.7 mm1,580 mm2Vinyl, card and thin sheet
7.25 × 8 in (184 × 203 mm)3.7 mm2,107 mm1Any material, including 3 mm wood and acrylic
10.87 × 12 in (276 × 305 mm)5.5 mm3,161 mm1Any material, including 3 mm wood and acrylic

The narrowest join is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More checkerboard SVG files

← Checkered flag on a pole All 16 checkerboards Crossed checkered flags →