Free castle SVG

Castle tower with a flag SVG

Castle tower with a flag. The preview is the SVG file itself.

One round tower on its own: a tapering shaft on a splayed foot, a head carried out on corbels with battlements above, a cross-shaped arrow loop, a door and a long pennant.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	44 × 100 mm (1.73 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	13: 1 outer edge and 12 cut-outs
Cut length	682 mm at this size
Narrowest part	1.7 mm at this size
Nodes	110 curve and line segments

Measured from the file. PNG: 923 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.44 × 1 in (11 × 25 mm)	0.43 mm	173 mm	190	Too fine for most machines
0.88 × 2 in (22 × 51 mm)	0.86 mm	346 mm	55	Fine detail: vinyl and paper only, weed with care
1.32 × 3 in (34 × 76 mm)	1.3 mm	520 mm	24	Vinyl, card and thin sheet
1.76 × 4 in (45 × 102 mm)	1.7 mm	693 mm	12	Vinyl, card and thin sheet
2.64 × 6 in (67 × 152 mm)	2.6 mm	1,039 mm	4	Vinyl, card and thin sheet
3.52 × 8 in (89 × 203 mm)	3.5 mm	1,386 mm	3	Any material, including 3 mm wood and acrylic
5.28 × 12 in (134 × 305 mm)	5.2 mm	2,079 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More castle SVG files

← Simple castle for children All 12 castles Sand castle with a spade →