Free castle SVG

Castle with a gatehouse SVG

Castle with a gatehouse, as a solid black shape
Castle with a gatehouse. The preview is the SVG file itself.

A stone castle from the front: a gatehouse with a portcullis in its arch, a battlemented wall, a square tower at each end, arrow slits, a few courses of stone and a flag.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 85 mm (3.94 × 3.36 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut30: 1 outer edge and 29 cut-outs
Cut length1,133 mm at this size
Narrowest part2 mm at this size
Nodes235 curve and line segments

Measured from the file. PNG: 2,000 × 1,719 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.85 in (25 × 22 mm)0.51 mm288 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.71 in (51 × 43 mm)1 mm576 mm30Vinyl, card and thin sheet
3 × 2.56 in (76 × 65 mm)1.5 mm863 mm12Vinyl, card and thin sheet
4 × 3.42 in (102 × 87 mm)2 mm1,151 mm6Vinyl, card and thin sheet
6 × 5.12 in (152 × 130 mm)3 mm1,727 mm2Any material, including 3 mm wood and acrylic
8 × 6.83 in (203 × 174 mm)4.1 mm2,302 mm1Any material, including 3 mm wood and acrylic
12 × 10.25 in (305 × 260 mm)6.1 mm3,453 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More castle SVG files

← Castle in a ring by moonlight All 12 castles Princess castle with pointed towers →