Free care card SVG

Tumbler care card as a hang tag SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Tumbler care card as a hang tag, as a solid black shape
Tumbler care card as a hang tag. The preview is the SVG file itself.

A tag with a point and a hole at one end, to tie to a straw or a handle with twine. It reads HAND WASH ONLY, DO NOT SOAK, DO NOT MICROWAVE. Cut 89 mm long, the lettering is 4.6 mm tall.

What is in the file

Size100 × 54 mm (3.94 × 2.13 in), scales to any size
Pieces37 separate pieces
Outlines to cut54: 37 outer edges and 17 cut-outs
Cut length1,413 mm at this size
Narrowest part1.4 mm at this size
Nodes487 curve and line segments

Measured from the file. PNG: 2,000 × 1,115 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.54 in (25 × 14 mm)0.36 mm359 mm160Too fine for most machines
2 × 1.08 in (51 × 27 mm)0.71 mm718 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.62 in (76 × 41 mm)1.1 mm1,077 mm18Vinyl, card and thin sheet
4 × 2.16 in (102 × 55 mm)1.4 mm1,436 mm10Vinyl, card and thin sheet
6 × 3.24 in (152 × 82 mm)2.1 mm2,153 mm3Vinyl, card and thin sheet
8 × 4.32 in (203 × 110 mm)2.8 mm2,871 mm2Vinyl, card and thin sheet
12 × 6.48 in (305 × 165 mm)4.3 mm4,307 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More care card SVG files

← Tumbler care card with four instructions All 14 care cards Round tumbler care card or sticker →