Free card template SVG

Gate fold card template SVG

Gate fold card template, as a solid black shape
Gate fold card template. The preview is the SVG file itself.

A gate-fold card: a back panel with a half-width door on each side. The doors close over it and meet down the middle along a slow S-shaped line, with a row of dots beside each edge. Cut 223 mm wide it folds to A6, 105 × 148 mm; the open sheet fits A4 or Letter card lengthways.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 66 mm (3.94 × 2.61 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut45: 1 outer edge and 44 cut-outs
Cut length608 mm at this size
Narrowest part2.4 mm at this size
Nodes152 curve and line segments

Measured from the file. PNG: 2,000 × 1,350 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.66 in (25 × 17 mm)0.61 mm154 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.32 in (51 × 34 mm)1.2 mm309 mm40Vinyl, card and thin sheet
3 × 1.99 in (76 × 50 mm)1.8 mm463 mm15Vinyl, card and thin sheet
4 × 2.65 in (102 × 67 mm)2.4 mm618 mm8Vinyl, card and thin sheet
6 × 3.97 in (152 × 101 mm)3.7 mm927 mm2Any material, including 3 mm wood and acrylic
8 × 5.3 in (203 × 135 mm)4.9 mm1,235 mm2Any material, including 3 mm wood and acrylic
12 × 7.94 in (305 × 202 mm)7.3 mm1,853 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More card template SVG files

← Square card template with a wavy edge All 13 card templates Easel card template →