Free candy SVG

Wrapped sucker SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Wrapped sucker, as a solid black shape
Wrapped sucker. The preview is the SVG file itself.

A ball sucker still in its wrapper: a round sweet with a highlight, the wrapper gathered into a ruffle where it meets the stick, and a plain stick. The same on both sides apart from the highlight.

What is in the file

Size50 × 100 mm (1.97 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length356 mm at this size
Narrowest part1.1 mm at this size
Nodes61 curve and line segments

Measured from the file. PNG: 1,038 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.5 × 1 in (13 × 25 mm)0.28 mm90 mm170Too fine for most machines
1 × 2 in (25 × 51 mm)0.56 mm181 mm50Fine detail: vinyl and paper only, weed with care
1.5 × 3 in (38 × 76 mm)0.84 mm271 mm21Fine detail: vinyl and paper only, weed with care
2 × 4 in (51 × 102 mm)1.1 mm362 mm10Vinyl, card and thin sheet
3 × 6 in (76 × 152 mm)1.7 mm543 mm3Vinyl, card and thin sheet
4 × 8 in (102 × 203 mm)2.2 mm723 mm2Vinyl, card and thin sheet
6 × 12 in (152 × 305 mm)3.4 mm1,085 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More candy SVG files

← Swirl lollipop on a stick All 18 candies Cotton candy on a cone →