Free candy SVG

Candy bar in a blank wrapper SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Candy bar in a blank wrapper. The preview is the SVG file itself.

A wrapped candy bar lying level, its ends crimped into a row of teeth, with a seam at each end and an empty oval where the name would be. Put your own name, date or joke in the oval.

What is in the file

Size	100 × 34 mm (3.94 × 1.34 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	656 mm at this size
Narrowest part	4 mm at this size
Nodes	94 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 731 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.34 in (25 × 9 mm)	1 mm	167 mm	220	Vinyl, card and thin sheet
2 × 0.68 in (51 × 17 mm)	2 mm	333 mm	65	Vinyl, card and thin sheet
3 × 1.02 in (76 × 26 mm)	3 mm	500 mm	30	Any material, including 3 mm wood and acrylic
4 × 1.36 in (102 × 35 mm)	4.1 mm	666 mm	14	Any material, including 3 mm wood and acrylic
6 × 2.04 in (152 × 52 mm)	6.1 mm	1,000 mm	5	Any material, including 3 mm wood and acrylic
8 × 2.72 in (203 × 69 mm)	8.1 mm	1,333 mm	4	Any material, including 3 mm wood and acrylic
12 × 4.08 in (305 × 104 mm)	12 mm	1,999 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More candy SVG files

← Chocolate bar, half unwrapped All 18 candies Gumball machine →