Free candy SVG

Peppermint candy swirl SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Peppermint candy swirl, as a solid black shape
Peppermint candy swirl. The preview is the SVG file itself.

A round peppermint from above: six curved wedges cut out of a disc, leaving a hub, a rim and six curved spokes. Back it with red and it is a starlight mint. Turn it a sixth and it looks the same.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length953 mm at this size
Narrowest part5.4 mm at this size
Nodes136 curve and line segments
Symmetry6-fold rotation

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)1.4 mm242 mm100Vinyl, card and thin sheet
2 × 2 in (51 × 51 mm)2.7 mm484 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)4.1 mm726 mm9Any material, including 3 mm wood and acrylic
4 × 4 in (102 × 102 mm)5.5 mm968 mm4Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)8.2 mm1,452 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)11 mm1,936 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)16 mm2,905 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More candy SVG files

← Wrapped candy with stripes All 18 candies Wrapped peppermint candy →