Free cactus SVG

Cactus with spine marks SVG

Cactus with spine marks, as a solid black shape — Cactus with spine marks. The preview is the SVG file itself.

A saguaro with matching arms, covered in short dashes for spines, set in staggered rows. Symmetric, for a centred print or a stencil.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	69 × 100 mm (2.72 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	22: 1 outer edge and 21 cut-outs
Cut length	690 mm at this size
Narrowest part	5.3 mm at this size
Nodes	113 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,404 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.69 × 1 in (18 × 25 mm)	1.3 mm	175 mm	130	Vinyl, card and thin sheet
1.38 × 2 in (35 × 51 mm)	2.7 mm	351 mm	35	Vinyl, card and thin sheet
2.07 × 3 in (53 × 76 mm)	4 mm	526 mm	15	Any material, including 3 mm wood and acrylic
2.76 × 4 in (70 × 102 mm)	5.4 mm	701 mm	8	Any material, including 3 mm wood and acrylic
4.14 × 6 in (105 × 152 mm)	8.1 mm	1,052 mm	2	Any material, including 3 mm wood and acrylic
5.52 × 8 in (140 × 203 mm)	11 mm	1,402 mm	2	Any material, including 3 mm wood and acrylic
8.28 × 12 in (210 × 305 mm)	16 mm	2,103 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cactus SVG files

← Cactus silhouette All 18 cacti Spiky cactus →