Free cactus SVG

Potted ball cactus SVG

Potted ball cactus, as a solid black shape
Potted ball cactus. The preview is the SVG file itself.

A ball cactus with rib slots and a flower, sitting in a pot with a plain stripe. Compact, so it suits stickers, mugs and small tags.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size62 × 100 mm (2.46 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length883 mm at this size
Narrowest part3.2 mm at this size
Nodes81 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,277 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.62 × 1 in (16 × 25 mm)0.81 mm224 mm140Fine detail: vinyl and paper only, weed with care
1.25 × 2 in (32 × 51 mm)1.6 mm449 mm40Vinyl, card and thin sheet
1.87 × 3 in (48 × 76 mm)2.4 mm673 mm15Vinyl, card and thin sheet
2.5 × 4 in (63 × 102 mm)3.3 mm897 mm8Any material, including 3 mm wood and acrylic
3.74 × 6 in (95 × 152 mm)4.9 mm1,346 mm3Any material, including 3 mm wood and acrylic
4.99 × 8 in (127 × 203 mm)6.5 mm1,794 mm2Any material, including 3 mm wood and acrylic
7.49 × 12 in (190 × 305 mm)9.8 mm2,691 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cactus SVG files

← Ball cactus with a flower All 18 cacti Prickly pear cactus →