Free butterfly SVG

Split butterfly for a name SVG

Split butterfly for a name, as a solid black shape — Split butterfly for a name. The preview is the SVG file itself.

The classic butterfly cut in two with a clear band across the middle, where a name or monogram goes. It comes as two pieces: upper wings and lower wings.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 82 mm (3.94 × 3.24 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	12: 2 outer edges and 10 cut-outs
Cut length	1,301 mm at this size
Narrowest part	1.8 mm at this size
Nodes	249 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,658 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.82 in (25 × 21 mm)	0.46 mm	330 mm	110	Too fine for most machines
2 × 1.64 in (51 × 42 mm)	0.91 mm	661 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.47 in (76 × 63 mm)	1.4 mm	991 mm	12	Vinyl, card and thin sheet
4 × 3.29 in (102 × 84 mm)	1.8 mm	1,322 mm	6	Vinyl, card and thin sheet
6 × 4.93 in (152 × 125 mm)	2.7 mm	1,983 mm	2	Vinyl, card and thin sheet
8 × 6.58 in (203 × 167 mm)	3.7 mm	2,644 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.86 in (305 × 251 mm)	5.5 mm	3,965 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More butterfly SVG files

← Three flying butterflies All 20 butterflies Layered butterfly in two colours →