Free butterfly SVG

Layered butterfly in two colours SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Layered butterfly in two colours, in layered colours
Layered butterfly in two colours. The preview is the SVG file itself.

Two layers: a plain coloured butterfly underneath and the black veined monarch on top, so the colour shows through every cell. Cut each from its own sheet.

What is in the file

Size100 × 78 mm (3.94 × 3.08 in), scales to any size
Pieces2 separate pieces
Outlines to cut56: 2 outer edges and 54 cut-outs
Cut length1,858 mm at this size
Narrowest part1.8 mm at this size
Nodes410 curve and line segments
SymmetryMirror
Layers2: colour and veins

Measured from the file. PNG: 2,000 × 1,583 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.78 in (25 × 20 mm)0.46 mm472 mm120Too fine for most machines
2 × 1.57 in (51 × 40 mm)0.91 mm944 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.35 in (76 × 60 mm)1.4 mm1,416 mm12Vinyl, card and thin sheet
4 × 3.13 in (102 × 80 mm)1.8 mm1,888 mm6Vinyl, card and thin sheet
6 × 4.7 in (152 × 119 mm)2.7 mm2,832 mm2Vinyl, card and thin sheet
8 × 6.26 in (203 × 159 mm)3.7 mm3,775 mm1Any material, including 3 mm wood and acrylic
12 × 9.4 in (305 × 239 mm)5.5 mm5,663 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More butterfly SVG files

← Split butterfly for a name All 20 butterflies Butterfly outline →